Description
Five miniPCI slots and three Gigabit Ethernet ports give you enough connectivity options to use the RB435G as the central part of your network. Now with Gigabit ports, to properly utilize all the speed 802.11n with Nv2 wireless.
Five miniPCI slots to be used for four sectors and a backbone, or any other configuration you need- RB435G has largest number of miniPCI slots from all our products. If you need to utilize many miniPCI cards - RB435G is your choice!
The two USB 2.0 ports can be used for extending storage, adding a 3G wireless modem for backup connectivity,for a mobile installation or all together.
Product specifications
| Details |
|---|
| Product code |
RB435G |
| CPU nominal frequency |
680 MHz |
| CPU core count |
1 |
| Size of RAM |
256 MB |
| Architecture |
MIPS-BE |
| 10/100 Ethernet ports |
0 |
| 10/100/1000 Ethernet ports |
3 |
| MiniPCI slots |
5 |
| MiniPCI-e slots |
0 |
| Wireless chip model |
None |
| Number of USB ports |
2 |
| Memory Cards |
1 |
| Memory card type |
microSD |
| Power Jack |
8-30V DC |
| 802.3af support |
No |
| PoE |
8-28V DC on Ether1 |
| Voltage Monitor |
Yes |
| PCB temperature monitor |
Yes |
| CPU temperature monitor |
No |
| Dimensions |
105mm x 154mm |
| Operating System |
RouterOS |
| Operating temperature range |
-30C to +60C |
| License level |
L5 |
| Current Monitor |
Yes |
| CPU |
AR7161-BC1A |
| SFP ports |
0 |
| USB slot type |
USB type A |
| |
|
Performance test results
| RB435G (680Mhz) |
Gigabit port test |
RouterOS |
| Mode |
Configuration |
64 byte |
512 byte |
1518 byte |
| kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
| Bridging |
none |
187.3 |
122.9 |
171.9 |
728.9 |
58.0 |
712.7 |
| Bridging |
25 bridge filter rules |
86.4 |
56.7 |
84.5 |
358.3 |
58.5 |
718.8 |
| Routing |
none |
147.0 |
96.4 |
136.1 |
577.1 |
59.7 |
733.6 |
| Routing |
25 simple queues |
137.0 |
89.9 |
117.7 |
499.0 |
55.2 |
678.3 |
| Routing |
25 ip filter rules |
59.2 |
38.8 |
59.4 |
251.9 |
54.7 |
672.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
