Description
The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.
It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied
to the unit. Maximum load on the port is 500mA.
Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.
Product specifications
| Details |
|---|
| Product code |
RB951Ui-2HnD |
| CPU nominal frequency |
600 MHz |
| CPU core count |
1 |
| Size of RAM |
128 MB |
| 10/100 Ethernet ports |
5 |
| 10/100/1000 Ethernet ports |
0 |
| MiniPCI slots |
0 |
| MiniPCI-e slots |
0 |
| Wireless chip model |
AR9344-DC3A |
| Wireless standards |
802.11b/g/n |
| Number of USB ports |
1 |
| Power Jack |
Yes |
| 802.3af support |
No |
| PoE |
8-30V DC on Ether1 |
| Voltage Monitor |
No |
| CPU temperature monitor |
No |
| PCB temperature monitor |
No |
| Dimensions |
113x138x29mm |
| Operating System |
RouterOS |
| Operating temperature range |
-20C +50C |
| License level |
L4 |
| Antenna gain DBI |
2.5dBi |
| Current Monitor |
No |
| TX power |
30dBm |
| CPU |
AR9344-DC3A |
| Max Power consumption |
Up to 7W |
| SFP ports |
0 |
| USB slot type |
USB type A |
| Number of chains |
2 |
| |
|
Included parts
Performance test results
| RB951Ui-2HnD (600Mhz) |
100M port test |
RouterOS |
| Mode |
Configuration |
64 byte |
512 byte |
1518 byte |
| kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
| Bridging |
none (fast path) |
269.6 |
176.9 |
116.5 |
494.0 |
40.0 |
491.5 |
| Bridging |
25 bridge filter rules |
87.6 |
57.5 |
86.0 |
364.6 |
40.0 |
491.5 |
| Routing |
none (fast path) |
226.9 |
148.8 |
116.5 |
494.0 |
40.0 |
491.5 |
| Routing |
25 simple queues |
106.6 |
69.9 |
103.9 |
440.5 |
40.0 |
491.5 |
| Routing |
25 ip filter rules |
60.5 |
39.7 |
59.6 |
252.7 |
40.0 |
491.5 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
