Description
SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.
Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.
Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide
Product specifications
Details |
Product code |
RBSXTG-5HPnD-SAr2 |
CPU nominal frequency |
600 MHz |
CPU core count |
1 |
Size of RAM |
64 MB |
10/100 Ethernet ports |
0 |
10/100/1000 Ethernet ports |
1 |
MiniPCI slots |
0 |
MiniPCI-e slots |
0 |
Wireless chip model |
AR9344-BC2A |
Wireless standards |
802.11a/n |
Number of USB ports |
1 |
802.3af support |
No |
PoE |
8-30V DC |
Voltage Monitor |
Yes |
PCB temperature monitor |
Yes |
CPU temperature monitor |
No |
Dimensions |
140x140x56mm |
Operating System |
RouterOS |
Operating temperature range |
-30C .. +80C |
License level |
L4 |
Antenna gain DBI |
14dBi |
Current Monitor |
No |
TX power |
30dBm |
CPU |
AR9344-BC2A |
Max Power consumption |
Up to 7W |
SFP ports |
0 |
USB slot type |
USB type A |
Number of chains |
2 |
|
|
Included parts
Performance test results
RBSXTG-5HPnD-SAr2 (600Mhz) |
Gigabit port test |
RouterOS |
Mode |
Configuration |
64 byte |
512 byte |
1518 byte |
kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
Bridging |
none (fast path) |
269.6 |
176.9 |
232.0 |
983.7 |
81.0 |
995.3 |
Bridging |
25 bridge filter rules |
87.6 |
57.5 |
86.0 |
364.6 |
81.0 |
995.3 |
Routing |
none (fast path) |
226.9 |
148.8 |
210.0 |
890.4 |
81.0 |
995.3 |
Routing |
25 simple queues |
106.6 |
69.9 |
103.9 |
440.5 |
81.0 |
995.3 |
Routing |
25 ip filter rules |
60.5 |
39.7 |
59.6 |
252.7 |
56.8 |
698.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results